The Fiat FreakOut is the largest Fiat event of the year. Make plans now so you don't miss it!
The Fiat 500X has an advanced All-Wheel-Drive system. See how it outperforms the competition.
A look at how the new Fiat 124 Spider stacks up against the original
Within its compact dimensions, the Fiat 500L has the room of a full-sized car. See how Fiat did it and the concept and goals of the design team
FIAT 500, FIAT 500L, Fiat 500X AND FIAT 500 ABARTH SPECS
Wednesday, October 31, 2012
Tuesday, October 30, 2012
Now accessorizing your Fiat 500 is easier than ever. Fiat USA has just unveiled a new program that allows you to customize your Fiat 500 or 500 Abarth right at your Fiat Studio even before you take delivery of it! The program is called the Fiat Custom Shop, and gives owners the ability to order genuine Fiat accessories and have them factory fitted with the price included with their monthly payments.
The Fiat Custom Shop is an actual upfit center located just outside of the Fiat 500 assembly line. Currently there are 60 parts offered, but the goal is to add to that tally month by month until a very extensive lineup is available including emission compliant high performance parts. The Fiat Custom Shop opens this week!
Below are the preliminary details released today at SEMA:
New Fiat Custom ShopOffering quality-tested and factory-installed Fiat 500 parts right from the manufacturer, the new Fiat Custom Shop will offer hassle-free individualization with a menu of packages that feature Genuine FIAT Parts by Mopar. The new Fiat Custom Shop will also give consumers the opportunity to finance these added packages with their monthly payments.
Mopar and FIAT Brand North America collaborated to design a world-class factory-installed upfit program. During the vehicle-ordering process, Fiat 500 customers may select from a range of accessory packages, packages that have been thoroughly validated and quality-tested to the exact engineering specifications and warranty requirements of the U.S.-spec Fiat 500.
The Fiat Custom Shop will offer select exterior and interior options. Interior packages will include Katzkin seating, premium trim packages with a variety of leathers, suedes, colors, two-tone combinations, and piping, stitch and embroidery options.
For those who simply want to add accessories and performance parts to their Fiat 500 at their dealership, Mopar offers more than 150 from which to choose. From an accessories standpoint, free-standing features range from graphics to roof racks to carriers. For performance, FIAT Studios offer a variety of performance parts including cat-back exhaust, brake kits and suspension parts for ultimate handling.
Images and Press Release: Fiat USA
Monday, October 29, 2012
Fiat fans should expect big news this week because the SEMA show kicks off Tuesday and runs through the end of this week. SEMA stands for the Specialty Equipment Market Association, and every year puts on an impressive trade show in Las Vegas highlighting the latest aftermarket and OEM parts and accessories. Look for Mopar, Magneti Marelli, 500 Madness and Romeo Ferraris, just to name a few, to present some outrageous concept cars and introduce a plethora of accessories for Fiat enthusiasts to customize their Fiat 500s and 500 Abarths.
The videos below give you a hint at what Fiat and Magnetti Marelli are bringing to the show. Stay tuned this week for updates!
Saturday, October 27, 2012
The Fiat 500 Abarth offers a seemingly endless array of customization options. One popular enhancement for the Fiat 500 Abarth is a carbon fiber dash panel. It gives the interior an upscale look and is used in the special Abarth 695 series available in Europe.
The panels are available from various manufacturers, and I sourced mine from 500 Madness. Like most, if not all custom parts, there are no instructions on installing these products as they are geared towards professional installers. However, an Abarth owner or regular 500 owner for that matter can do the install if they have patience and the will. Of course, some instructions would help so the following is how I installed a carbon fiber dash in my own Fiat 500 Abarth.
First a word or two of advice. These carbon fiber dashboards are hand made and require some handwork of your own to make fit. If you are insane about the fit of your radio, you may be disappointed because there can be variances in the handmade panels compared to the die cast factory pieces. This is not a simple remove and replace, 10 minute job, especially if you have an Abarth.
Warning: Disable the airbag system before attempting any steering wheel, steering column or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.
Eye protection. You will be using a high speed cutting device so don't take a chance.
Before you attach the bracket to the carbon fiber dash, test fit the dash to the car and make sure it is molded correctly and fits properly. You need to look at where the radio fits and all along the top of the dash where it meets the top of the dashboard. You are looking for gaps and to ensure the dash lines up with the radio. There are tabs that can be trimmed to adjust the panel fit. Take the time now before you attach the bracket or you will have bigger issues later.
Once you are satisfied that the dashboard fits, install the bracket to the backside of the dashboard. I layed the carbon fiber dash on a soft towel and pressed the bracket down firmly to make sure the tape had good adhesion. Sorry no pics, but I had my hands full! Make sure you use enough tape by the switches because if you don't the switches will move around when you punch the Sport button.
Reinstall the air vent and then hook the wire harness going to the center buttons. Don't forget this, because you'll have to remove the dashboard all over again (don't ask me why I know this...)!
Position the dash in the proper location and push to engage the bracket fasteners. They will snap in. Make sure the dash fits all around the edges. Pop it back off and trim the tabs if you are not satisfied. Remember this is custom work!
1.Tilt the steering column to the full-downward position.
2.Remove the two screws (marked in blue) attaching the upper column shroud to the lower shroud. After removing the screws, unclip the shrouds from each other by applying hand pressure along the seams where the shrouds connect on the sides, then remove the lower shroud. Don't be surprised if this is a pain to do! I had to use two hands to get this to pop apart.
3. Remove the column shrouds.
4. Remove the upper screw (red) and the two lower screws (green) and the cluster bezel will be free. You don't have to totally remove it, just move it so the boost gauge is out of the way.
This is what you'll be presented with. The left dash panel on a Fiat 500 Abarth is custom trimmed at the factory for fitment. Guess what, you'll need to do the same!
Once this is done, reinstall the screws that hold the instrument cluster down and assemble the steering column shrouds.
Disclaimer: This is how I installed a carbon fiber dash panel in my Fiat 500 Abarth and is provided for entertainment purposes. If you have any doubts on you ability to do this work or have any issues, I recommend having it done by a professional. I am not responsible for any issues arriving from you reading this post. Use at your own risk.