Fiat 500 USA Homepage

What's new in the Fiat 500 world

The NEW 2021 Fiat 500 debut!

Read all about the exciting NEW Fiat 500 debuting in Europe.

Get the 2019 Fiat 500 before they're gone!

Complete pricing details on the new 2019 Fiat 500 are here.

Fiat 500X All-Wheel-Drive System-Explored

A look at the 500X's All-Wheel-Drive system and how it stacks up to the competition

Fiat 124 Spider!

Everything you need to know about the new Iconic Fiat 124 Spider.

The Roomy Fiat 500L

The Fiat 500L has the room of a full-sized car within its subcompact dimensions. Learn more about this versatile car

Why are Fiat enthusiasts crazy about their cars?

Articles that look at some of the great cars, features and accomplishments that make up the Fiat Brand

Tuesday, September 9, 2014

Fiat 500 License Plate Bulb Change

Fiat 500 Tailgate Handle

There have been more than 165,000 Fiat 500s sold in North America since 2011. As the cars age, it is inevitable that things like light bulbs eventually burn out. One item that caused owners of early Fiat 500 models some annoyance was replacing the license plate LED bulb located in the tailgate lift handle.

Early cars required you to change the entire tailgate lift handle at considerable expense - normally well over $100. However, starting somewhere around March 2012, Fiat revised the license plate LED to make it replaceable, with a cost of around $20. Below is how to change the license plate LED bulb in late model Fiat 500, 500 Cabrio and 500 Abarth models.

Fiat 500 License Plate Bulb

Take a small screwdriver and insert it into the notch at the one end of the license plate lamp lens on the underside of the liftgate light bar and handle unit.  Gently release the latch tab that secures the lamp in the light bar assembly.

Fiat 500 Abarth License Plate Bulb

Carefully pry the light out of the liftgate handle.

Fiat 500 License Plate Light Connector

Late model cars will have this style connector with locking tabs that allow you to unplug the bulb from the wire harness. Early cars will not have these tabs and the light bulb is serviced as a complete assembly. If you are handy you may be able to modify the harness with a new connector so you can use the late model bulb.

Fiat 500 License Plate Bulb Removal

Using the small screwdriver, carefully unlock each tab and remove the bulb from the connector. The tabs are delicate and the connectors will become fragile as the car ages, so proceed with care. Plug your new bulb in and just reverse the procedures and you are done!

Fiat 500 License Plate Bulb Part Number

  • Right 68212034AA
  • Left 68212035AA

Read More:


Anonymous said...

if you have the older style can you just cut the wires and attached the new assembly.

Anonymous said...

Where can you get the full assembly instead of just the new bulb?